What should you pay attention to when connecting terminals

What should be noted when wiring terminals? In order to play the role of wiring terminals, a reasonable wiring is very important. So what should be paid attention to when wiring terminals?

1. The production of wire ends. Due to the fact that the flexible wire is composed of multiple strands of small copper wire, the working pressure cannot be evenly applied to the copper wire when connected to the control terminal. This can lead to uneven distribution of force on the wire after crimping, making it more prone to loosening and falling off. Terminal block is a type of accessory product used to achieve electrical connections, which is classified as a connector in industry. The UK terminal block is suitable for a large number of wire interconnections. In the power industry, there are specialized terminal blocks and terminal boxes, which are full of terminal blocks, single-layer, double-layer, current, voltage, ordinary, interruptible, and so on. A certain crimping area is used to ensure reliable contact and sufficient current flow. With the increasing level of industrial automation and stricter requirements for industrial control, the usage of terminal blocks is gradually increasing. With the development of the electronics industry, the range and variety of terminal blocks are increasing. Another development situation is that after the wire is connected to the installation hole of the equipment, there is no usable end, and there is too much gap time between the wire and the wire pressing frame. Insufficient force can also lead to whether the wire falls off when passing through. Therefore, in the process of making flexible cords, enterprises need to use wire stripping pliers to strip the wires, and then use terminal pliers to compact the wires and ends before wiring.

2. Marking of wires and terminal blocks. Different wire functions cannot work, and the corresponding terminal positions are also different. Therefore, when marking terminal blocks and wires, fast and correct wiring is very important.

3. When wiring, use a screwdriver to connect the wires, insert the made wire end into the crimping box of the wiring terminal, and tighten the screw to the fastening position with a screwdriver. Gently pull the wire to check if the wiring is secure.

Therefore, these details should be done on the wiring terminals to ensure good performance.